This DYS XM10 ESC has been specifically designed for the high KV motors of the small multi-rotors in mind. As well as using small high speed processors to get the size down the weight has also been keep down to 4.5g. Making this ESC an excellent addition to 120 or smaller size multi-rotors.
Another innovation is to twist the throttle signal cable to keep transmission crosstalk to a minimum. BLHeli firmware is preloaded to give excellent throttle response. Supporting refresh rates of throttle signal up to a maximum of 500Hz, which is compatible with all flight controllers. Also supporting ultra-high speed Oneshot125 and 3000Hz high refresh rate for fast response, better throttle linearity and making it the first choice for multi-rotor and racing frames.
A great choice for smaller frame multi-rotors. Designed with the DYS BE1104-4000KV motor in mind.
- XM series esc is an upgraded version from SN series, the basic frequency up to 50MHz and processing capacity is faster to support high KV motor properly by using the advanced processor.
- Specially for Multi-copter, fast throttle respond
- Suitable for throttle, which can compatible well with motor
- Throttle signal is twisted pair cable, reduce the crosstalk while the signal transfer by the copper wire and flight more stable
- Use new process ultra-low resistance MOSFET with miniaturization, and all flashes are N MOS with high withstanding current
- Minaturization design, XM10A/20A with high performance capacitor fliter on the board
- weight reduce to 2g, also already thicken the PCB copper specially and low heat for small aircraft
- Support high frequency maximum up to 500Hz throttle signal, compatible with all flight controls; Support ultra-high frequency Oneshot125 and high PWM frequency up to 3000Hz, flight response will be more sensitive and rapid, throttle liner will be better and shooting will be more smooth. It is the first choice for multicopter and racing
- Throttle lever travel and other settings are available to be set by USB linker; Support two-way mode and 3D mode for racing frame
- Throttle Signal Freq: 20-500Hz / Oneshot125 Ultra high speed
- Firmware: BLHeli
- Continuous Current: 10A
- Instant Current: 13A
- BEC: No
- Battery: 2-3S LiPoy
- Dimensions: 23 x 12 x 4.5mm
- Weight: 4.5g