• Atlas 180mm Carbon Fiber
  • Atlas 180mm Carbon Fiber
Atlas 180mm Carbon Fiber

Atlas 180mm Carbon Fiber

$49.95

Availability: Item is in stock

Description

Details

The Atlas 180 was built with every pilot in mind. From the very newest of new, to the seasoned racing pilot, the Atlas 180 will provide you with the necessities to grow.

We built the Atlas 180 to accept all the major type of FPV cameras used today. From the Mini cased 25X25mm all the way up to a full size 32mm board camera, the Atlas 180 fits them all. With the included camera plate and 2X20mm Bolts and Nylon lock nuts, you can mount your 32mm or 28mm board camera to the plate at any angle from 0 to 35 degrees. If you need even more camera angle for your very aggressive racers, will find it very easy to get a little more using only two bolts and a little hot glue. J Mini cased cameras bolt right into the provided A frame allowing quick and easy access to camera angle in the field.

We have designed, what we feel, is a very ingenious way to mount the XT60 connector to the frame. No more potential yanking of the solder pads on your PDB, or cutting/fraying of your wires, as all of that will stay inside the Atlas 180. When the time comes where you need to remove your battery quickly, ensure you will not damage your wiring.

The transmitter has been conveniently located in the rear of the frame mounting securely in the top plate with an antenna nut. You can easily access your dip switches or button to change channels on the fly, something you’ll need to do at the races.

You can build the Atlas 180 power train in several ways. It will take motors from 13XX all the way to 22XX sizes. You can start with smaller cheaper products then upgrade as you go and eventually get products that will put you top at the races. This quad will do it all.

If you are a first time pilot, or, first time builder, then we recommend some of the smaller, lighter, cheaper motors. For instance, I would have loved it if someone had helped me build the on of the following 3S configurations in the very beginning as the motors are half the price and crashes that ruin a motor will cost you half as much.

Specs

  • Size 180mm
  • Thickness 4mm
  • Bottom Plate Weight 69g
  • Top Plate Weight 9g
  • Side Wall Camera Mount Weight 1.3g
  • Camera Mount Plate Weight 1.5g
  • Material 3k Carbon Fiber
  • Airframe Weight With PDB and Hardware 127g

3S New Builder/Pilot, less expensive, not as fast, very light, still very fun. NOTE: Motors will handle short bursts on 4S with the recommended props, though shorten the lifespan of the motor.

Motors: DYS 1306-3100KV BX Series Set of Two CW/CCW Motors

ESC: DYS MX10A  (high kv esc)

Props: Gemfan CW 4045 ABS BlackGemfan CCW 4045 ABS Black

Battery: @450 to 1000mah

NOTE: DO NOT USE bullnose props with these motors. You will burn them out quickly.

3S New Builder/Pilot, still inexpensive, little faster

Motors: DYS BE1806 2300Kv

ESC: DYS BLHeli 16A ESC

Props: Gemfan CCW 4045BN GF Nylon BlackGemfan CW 4045BN GF Nylon Black

Battery: @850 to 1000mah

4S Intermediate Builder/Pilot, still inexpensive, little faster

Motors: DYS BE1806 2300Kv

ESC: DYS BLHeli 20A ESC

Props: Gemfan CCW 4045BN GF Nylon BlackGemfan CW 4045BN GF Nylon Black

Battery: @850 to 1000mah

4S Intermediate Builder/Pilot, Less expensive and less durable motors, fast enough to race

Motors: DYS 2204 2400kv Brushless Motor

ESC: DYS BLHeli XM20A ESC

Props: Gemfan CCW 4045BN GF Nylon BlackGemfan CW 4045BN GF Nylon Black

Battery: @850 to 1300mah

To have the Atlas put you in first at the finish line we’ve put together a beefy 4S configuration that can handle full throttle for extended periods of time on a 75C battery.

Motors: Lumenier RX2204-14 2300Kv MotorCobra CM-2204 2300Kv Motor or anything similar.

ESC: DYS BLHeli XM20A ESC

Props: Gemfan CCW 4045BN GF Nylon BlackGemfan CW 4045BN GF Nylon Black

Battery: @1000 to 1300mah

Included

  • 1x 4mm Thick 3k Carbon Fiber bottom plate
  • 1x 1.5mm 3k Atlas top plate
  • 2x 1.5mm 3k side camera mount
  • 1x 1.5mm 3k camera plate
  • 1x 3mm 3k XT60 holder
  • 1x Atmo Simple PDB
  • 1x Female XT60 pigtail
  • 2x black antenna tubes
  • 1x medium Atmo battery strap
  • 8x Aluminum hex standoffs red
  • 8x M3x8 Aluminum screws red
  • 7x M3x6 Aluminum screws red
  • 1x M3x10 Aluminum screw red
  • 1x M3x10 Stainless buttton head screw
  • 8x M3x8 Stainless button head screws
  • 7x M3x6 Stainless button head screws
  • 5x M2x20 Stainless screws
  • 5x M2 Nylon lock nut
  • 5x M3x10x6 Nylon spacers black
  • 5x M3 Nylon nuts black

Reviews

There are currently no product reviews. Be the first one.


This product was added to our catalog on Tuesday, March 01, 2016.